The BELL+HOWELL Portable Light Bar is designed to stay plugged in as a backup, then illuminate automatically when household power fails.
This BELL+HOWELL Portable Light Bar review looks at its outage sensor, rechargeable battery, two brightness modes, and the limits buyers should consider.
Portable Light Bar Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsBELL+HOWELL Portable Light Bar
A practical pick for households wanting an automatic, rechargeable light for power cuts, closets, garages, and dry-weather outings.
- A 16.5-inch rechargeable light bar with 60 built-in LEDs.
- Maximum output of up to 720 lumens, with two brightness modes.
- An outage sensor intended to activate the light when household power fails while it is plugged in and the sensor is active.
- Includes an AC charging adapter; the recommended initial charge is about 24 hours.
Pros
- Automatic activation during a power failure can make the light easier to locate and use when a room goes dark.
- The 720-lumen maximum and lower brightness setting give it flexibility for different lighting needs and battery priorities.
Consider before buying
- It needs to remain plugged in with the sensor active for the automatic outage feature to work as intended.
- The initial charge takes about 24 hours, and the battery should be recharged every few months while stored.
Read the full review summary
The defining feature is its automatic outage response: leave the bar connected to an outlet with the sensor active, and it is intended to switch on when power cuts out.
That can make it more convenient than a flashlight stored in a drawer, particularly in rooms where people may need to move around during a blackout.
Its 16.5-inch bar, 60 LEDs, and maximum output of 720 lumens are intended to spread light across a room or work area.
It also works as a portable utility light. A fold-out stand, hanger, and two brightness settings support different placements and tasks, while the rechargeable battery allows cordless use after charging.
It suits buyers who want one light for outage readiness and occasional use in places such as a garage, closet, tent, or RV. The design is for dry conditions, so outdoor use should be limited to sheltered situations.
The buying factors
Portable Light Bar Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Outage readiness
The active sensor is designed to turn the bar on automatically when household power fails, reducing the need to find a light by hand.
Light output range
Two brightness modes include a maximum of 720 lumens, giving buyers a brighter setting and a lower setting intended to extend battery use.
Placement flexibility
The fold-out stand and hanger allow tabletop placement or suspension from a suitable hook.
Portability
Its rechargeable battery supports cordless use, and the listed weight is one pound; the bar is still a 16.5-inch light rather than a pocket flashlight.
Controls
A push-button control and two brightness choices keep operation straightforward, though the product description does not detail additional control options.
Weather suitability
The light is specified for dry conditions and is not waterproof, limiting its usefulness in exposed outdoor settings.
Key Features and Specifications of Portable Light Bar
- A 16.5-inch rechargeable light bar with 60 built-in LEDs.
- Maximum output of up to 720 lumens, with two brightness modes.
- An outage sensor intended to activate the light when household power fails while it is plugged in and the sensor is active.
- Includes an AC charging adapter; the recommended initial charge is about 24 hours.
- A fold-out stand and hanger support tabletop use or hanging from a suitable hook.
- Designed for indoor use and dry outdoor conditions; it is not waterproof.
Pros and Cons of Portable Light Bar
Pros
- Automatic activation during a power failure can make the light easier to locate and use when a room goes dark.
- The 720-lumen maximum and lower brightness setting give it flexibility for different lighting needs and battery priorities.
- The stand and hanger offer more placement options than a light that can only be held or laid flat.
- Rechargeable cordless operation makes it useful beyond its role as a plugged-in outage light.
Consider before buying
- It needs to remain plugged in with the sensor active for the automatic outage feature to work as intended.
- The initial charge takes about 24 hours, and the battery should be recharged every few months while stored.
- The light is not waterproof, so it is a poor choice for exposed rain or wet work areas.
- Runtime varies by brightness mode, and the high setting drains the battery faster; no specific runtime is provided.
Who Should Buy Portable Light Bar?
Good fit
Consider it if you want a backup light that can respond automatically to a household outage.
Keeping it connected in a frequently used room may be more convenient than relying on a flashlight that has to be found, switched on, or carried from elsewhere.
Before relying on that setup, choose an outlet location where the bar can remain plugged in and where its sensor can be left active.
It is also a reasonable fit for occasional work in a garage, basement, closet, shed, or campsite when a portable light with a stand or hanger is useful.
The two modes let you choose between the brighter setting and a lower setting intended to conserve battery. Plan the initial charge and periodic recharge if you want it ready after spending time in storage.
For a household backup, placement matters as much as the maximum output.
Set or hang it where the light can reach the area you need to navigate, and check that its automatic activation works in the intended outlet location before depending on it during an outage.
Who should skip it
Skip it if you need a light for rain, wet work, or other exposed conditions; the product is not waterproof and is intended for dry use.
Look for a different fit if you need a specified long runtime, a compact handheld flashlight, or a light that does not need to stay plugged in for automatic outage activation.
The description does not provide a runtime figure to compare against a particular task.
How the Portable Light Bar Fits Outage and Utility Use
Automatic lighting depends on placement
The outage sensor is the most distinctive part of the design.
Its convenience depends on leaving the bar plugged in and the sensor active, so it works best as a planned fixture in a useful location rather than a light kept in a drawer.
Think about which room you would want illuminated first and whether the outlet and mounting position suit that purpose.
Two modes balance brightness and battery use
The brighter mode reaches up to 720 lumens, while the lower mode is intended to stretch battery life.
That gives buyers a simple choice between more light and more conservative use, but the description does not specify how long either mode runs.
If you need illumination for a defined number of hours, confirm the expected runtime before choosing it for that role.
Stand and hanger broaden its utility
A fold-out stand makes tabletop placement possible, while the hanger supports suspension from a suitable hook. This can help adapt the light to a work surface, shelf, or tent setup without requiring one fixed mounting position.
Check that the location offers stable support and a useful angle for the area you need to see.
Dry conditions set the outdoor boundary
The bar is presented for indoor and outdoor use, including camping, but its stated design is not waterproof. That makes sheltered, dry settings the sensible choice outdoors.
For roadside or campsite use, keep it protected from rain and moisture rather than treating it as a weatherproof work light.
Alternatives to Portable Light Bar
No alternative model is recommended here. Compare the design and features that matter to your routine before choosing another option.
Is Portable Light Bar Worth It?
The BELL+HOWELL Portable Light Bar is worth considering as a convenient household outage light that can also serve for occasional dry-condition utility use.
Its automatic sensor, rechargeable battery, two brightness modes, stand, and hanger cover several practical needs in one device.
Buy it if you can keep it plugged in where the sensor can be active and you are comfortable managing the initial and periodic charging.
Choose another kind of light if waterproofing or a guaranteed runtime is essential, since this bar is limited to dry conditions and its description gives no specific runtime.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsBELL+HOWELL Portable Light Bar
A practical pick for households wanting an automatic, rechargeable light for power cuts, closets, garages, and dry-weather outings.
- A 16.5-inch rechargeable light bar with 60 built-in LEDs.
- Maximum output of up to 720 lumens, with two brightness modes.
- An outage sensor intended to activate the light when household power fails while it is plugged in and the sensor is active.
- Includes an AC charging adapter; the recommended initial charge is about 24 hours.