The FIFINE U1 Mic Pop Filter Screen review is especially relevant if you record voice, stream, or podcast with a compatible FIFINE microphone and want a compact shield that mounts directly around the mic.
Its metal mesh, replaceable rubber bands, and stated compatibility range make fit the key consideration.
FIFINE U1 Pop Filter Review Summary
The quick verdict

500+ ratings
Read Amazon ReviewsFIFINE U1 Mic Pop Filter Screen
A practical fit for creators with a compatible FIFINE microphone who want a compact shield to help reduce plosive noise and keep moisture off the mic.
- Curved metal mesh screen designed to help block wind, air blasts, and plosive noise.
- Wraparound form factor intended to keep moisture away from the microphone diaphragm.
- Listed compatibility includes FIFINE K669/K669B, K670/K670B, K683A, K678, and K690.
- Also specified for microphones measuring 40–70 mm in diameter; the product guidance discourages use with dynamic microphones such as the FIFINE AM8, K688, and TANK3.
Pros
- Attaches directly around the microphone for a compact recording setup.
- Metal mesh is designed to reduce plosives and air blasts during spoken recording.
Consider before buying
- Fit depends on the microphone’s model and diameter, so buyers should check compatibility before ordering.
- FIFINE advises against using it with certain dynamic models, including the AM8, K688, and TANK3.
Read the full review summary
The U1 uses a curved metal mesh screen that wraps around a microphone rather than sitting between the mic and speaker on a separate arm.
That design keeps the setup compact and may reduce obstruction around your face, while the shield is intended to help block air blasts and plosive noise and keep moisture away from the microphone diaphragm.
It is aimed at people using several FIFINE models, including the K669, K669B, K670, K670B, K683A, K678, and K690, as well as microphones measuring 40–70 mm in diameter.
Check both your microphone’s model and body diameter before buying: FIFINE specifically advises against pairing the U1 with dynamic models such as the AM8, K688, and TANK3.
The buying factors
FIFINE U1 Pop Filter Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Microphone compatibility
The product names several supported FIFINE models and gives a 40–70 mm diameter range, though the stated warning for some dynamic models makes a model-by-model check important.
Compact setup
The curved screen attaches around the microphone, avoiding a separate gooseneck arm and aiming to obstruct less of the recording space.
Plosive control design
The metal mesh is designed to block air blasts and plosive noise, a useful feature for close spoken-word recording.
Mounting convenience
A custom handle on the rubber band is intended to make mounting straightforward on desk or boom microphones.
Fit adjustability
Two included replacement bands in different dimensions provide options for fitting microphones across the stated size range.
Mic protection
The wraparound screen is intended to keep moisture away from the diaphragm, and a soft inner rubber pad helps protect the mic body from scratches.
Key Features and Specifications of FIFINE U1 Pop Filter
- Curved metal mesh screen designed to help block wind, air blasts, and plosive noise.
- Wraparound form factor intended to keep moisture away from the microphone diaphragm.
- Listed compatibility includes FIFINE K669/K669B, K670/K670B, K683A, K678, and K690.
- Also specified for microphones measuring 40–70 mm in diameter; the product guidance discourages use with dynamic microphones such as the FIFINE AM8, K688, and TANK3.
- Custom handle on the rubber band supports mounting on desk or boom microphones.
- Includes two additional flexible rubber bands, sized 1 4/5 inches and 2 1/5 inches, plus a user manual. Microphone is not included.
Pros and Cons of FIFINE U1 Pop Filter
Pros
- Attaches directly around the microphone for a compact recording setup.
- Metal mesh is designed to reduce plosives and air blasts during spoken recording.
- Includes two extra bands to accommodate different microphone diameters or replace the original band.
- Soft rubber inside the frame helps prevent the mount from scratching the microphone.
Consider before buying
- Fit depends on the microphone’s model and diameter, so buyers should check compatibility before ordering.
- FIFINE advises against using it with certain dynamic models, including the AM8, K688, and TANK3.
- The microphone itself is not included.
Who Should Buy FIFINE U1 Pop Filter?
Good fit
Consider the FIFINE U1 if you have one of the listed compatible FIFINE microphones or another mic within the 40–70 mm diameter range, and want a pop shield that travels with the microphone instead of a separate arm.
Its curved mesh and compact mounting approach suit podcasting, streaming, gaming, voice-overs, and other spoken-word recording where room around the mic matters.
The included spare bands make the fit more flexible if you need to change bands or accommodate a larger body.
Before buying, measure the section where the filter will sit and confirm the precise microphone model, especially if you use a dynamic mic. The stated diameter range alone should not override the product’s model-specific guidance.
Who should skip it
Skip this model if your microphone is one of the dynamic models FIFINE names as unsuitable, or if you cannot confirm that your mic’s model and diameter match the stated guidance.
A separate pop filter may be easier to assess when the U1’s wraparound fit is uncertain.
What the FIFINE U1 Pop Filter Means for Your Recording Setup
Check fit before focusing on features
This screen’s usefulness begins with a secure fit around the microphone. FIFINE lists several compatible models and a 40–70 mm diameter range, but also calls out dynamic microphones it does not recommend.
Confirm the exact model and measure the microphone where the band will sit; if either check conflicts with the guidance, choose a filter designed for that microphone.
A compact alternative to an arm-mounted screen
Because the mesh curves around the microphone, the U1 does not need a separate filter arm positioned between the speaker and mic.
That can make a desk or boom setup feel less crowded, though the wraparound style depends on the microphone body providing a suitable mounting point. Its custom handle is intended to make installation easier.
What the shield can and cannot establish
The mesh is designed to reduce air blasts and plosive noise, while the wraparound shape is intended to keep moisture away from the diaphragm.
Those are useful goals for close speech recording, but the description does not quantify how much noise reduction to expect. Placement and speaking technique remain practical factors to consider when setting up any spoken-word recording.
Plan for the package and upkeep
The package includes the curved screen, two spare rubber bands in different dimensions, and a manual; the microphone is sold separately. The soft rubber pad inside the frame is meant to protect the microphone from scratches.
If you switch microphones, recheck the diameter and compatibility guidance before reusing the filter.
Alternatives to FIFINE U1 Pop Filter
No alternative model is recommended here. Compare the design and features that matter to your routine before choosing another option.
Is FIFINE U1 Pop Filter Worth It?
The FIFINE U1 Mic Pop Filter Screen is worth considering for spoken-word creators who want a compact, microphone-mounted shield and can confirm a compatible fit.
Its curved metal mesh, spare bands, and soft inner pad make the design practical for a tidy desk or boom setup.
Treat compatibility as the deciding factor: check your exact model and microphone diameter, and follow FIFINE’s caution about the AM8, K688, and TANK3.
If those checks align with your setup, the U1 offers a straightforward way to add a pop shield without a separate filter arm.
Your review at a glance

500+ ratings
Read Amazon ReviewsFIFINE U1 Mic Pop Filter Screen
A practical fit for creators with a compatible FIFINE microphone who want a compact shield to help reduce plosive noise and keep moisture off the mic.
- Curved metal mesh screen designed to help block wind, air blasts, and plosive noise.
- Wraparound form factor intended to keep moisture away from the microphone diaphragm.
- Listed compatibility includes FIFINE K669/K669B, K670/K670B, K683A, K678, and K690.
- Also specified for microphones measuring 40–70 mm in diameter; the product guidance discourages use with dynamic microphones such as the FIFINE AM8, K688, and TANK3.