Product Reviews

SmallRig Top Handle 3765 Review: A Flexible Camera Cage Grip

A lightweight top handle for camera cage users who want a comfortable low-angle grip and several mounting points for on-camera accessories.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

In this smallrig camera cage review, the SmallRig Top Handle 3765 stands out as a compact way to add a carrying grip and accessory mounts to a compatible camera cage.

Its five cold shoes and threaded mounting points suit rigs that need room for a microphone, light, or monitor.

SmallRig Top Handle Review Summary

The quick verdict

SmallRig Top Handle 3765
4.8/5

2,000+ ratings

Read Amazon Reviews

SmallRig Top Handle 3765

A lightweight top handle for camera cage users who want a comfortable low-angle grip and several mounting points for on-camera accessories.

  • Designed for camera cages with ARRI-style locating holes; the handle attaches using a locking screw tightened with an Allen wrench.
  • Hollowed-out construction keeps the handle’s stated weight to 124 g.
  • Made mostly from aluminum alloy and fitted with anti-slip, anti-freeze silicone.
  • Three cold shoe mounts are positioned at the front, with two more at the rear.

Pros

  • Low-angle grip can make a caged camera easier to hold and maneuver.
  • Five cold shoes allow a flexible placement of compatible accessories.

Consider before buying

  • Its ARRI-style locating-hole interface requires a compatible cage; check the cage’s mounting pattern before buying.
  • Five shoe mounts and multiple threaded points can encourage a crowded rig, so plan accessory placement and cable clearance.
Read the full review summary

The Top Handle 3765 combines a low-angle grip with a broad set of attachment points. Its hollow aluminum-alloy construction weighs 124 g, while anti-slip, anti-freeze silicone is intended to make the grip more comfortable to hold.

Three cold shoes sit at the front and two at the rear, giving a small rig several places to mount accessories.

This handle is best suited to filmmakers who already use a cage with a compatible ARRI-style locating mount and want a light, adaptable grip.

The design favors mounting flexibility over a minimal profile; buyers should check their cage’s mounting interface and consider the combined load of the handle, camera, and accessories against the 10 kg maximum weight recommendation.

The buying factors

SmallRig Top Handle Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Cage mounting flexibility

ARRI-style locating holes and an Allen-key locking screw support a secure connection when paired with a compatible cage.

9/10

Accessory mounting options

Five cold shoes plus 1/4-20 and 3/8-16 threaded points provide several mounting choices.

8/10

Grip comfort

Anti-slip, anti-freeze silicone and the handle shape are intended to help during low-angle operation.

8/10

Weight and bulk

The 124 g weight is modest, though the handle still adds height and accessories add further load.

8/10

Rigging versatility

The mix of shoe and threaded mounts can support different accessory layouts.

7/10

Setup convenience

An Allen wrench is included to tighten the locking screw and assemble or remove the handle.

Key Features and Specifications of SmallRig Top Handle

  • Designed for camera cages with ARRI-style locating holes; the handle attaches using a locking screw tightened with an Allen wrench.
  • Hollowed-out construction keeps the handle’s stated weight to 124 g.
  • Made mostly from aluminum alloy and fitted with anti-slip, anti-freeze silicone.
  • Three cold shoe mounts are positioned at the front, with two more at the rear.
  • Additional accessory attachment points include 1/4-20 and 3/8-16 threaded holes.
  • The maximum weight recommendation is 10 kg; account for the camera rig and mounted accessories when considering the load.

Pros and Cons of SmallRig Top Handle

Pros

  • Low-angle grip can make a caged camera easier to hold and maneuver.
  • Five cold shoes allow a flexible placement of compatible accessories.
  • Threaded mounting points add options beyond the shoe mounts.
  • Lightweight aluminum-alloy construction limits the handle’s contribution to rig weight.

Consider before buying

  • Its ARRI-style locating-hole interface requires a compatible cage; check the cage’s mounting pattern before buying.
  • Five shoe mounts and multiple threaded points can encourage a crowded rig, so plan accessory placement and cable clearance.
  • The handle adds height to a camera setup, which may matter when packing or working in tight spaces.

Who Should Buy SmallRig Top Handle?

Good fit

Consider the SmallRig Top Handle 3765 if your cage has compatible ARRI-style locating holes and you want a grip that also serves as an accessory hub.

The five cold shoes can accommodate a varied layout, while the threaded holes offer additional ways to attach compatible rigging accessories.

It is particularly relevant for operators who use low-angle shots or move a caged camera by hand.

Its 124 g weight and silicone contact surfaces support a compact, grippable design, and the locking screw can be tightened with the supplied Allen wrench.

Before choosing it, map out the devices you intend to mount and where their cables will run. Keep the complete setup within the 10 kg maximum weight recommendation, and confirm the cage’s locating holes match the handle.

Who should skip it

Skip this handle if your cage does not provide the compatible ARRI-style locating-hole mount and you do not plan to use an appropriate mounting interface. A well-equipped handle cannot solve a cage compatibility mismatch.

It may also be a poor fit if you need a very low-profile camera setup or prefer to keep accessories off the top of the rig.

The multiple mounting positions are most useful when your shooting setup actually calls for them.

SmallRig Top Handle Review: Mounting, Grip, and Rig Fit

Check the cage interface first

The defining fit requirement is the handle’s ARRI-style locating-hole attachment. The locking screw and locating points are designed to work with a compatible cage, so confirm the cage’s top mounting pattern before purchase.

That check matters more than the handle’s general camera compatibility: a camera may fit inside a cage while the cage itself lacks the mounting points this handle uses.

Plan the accessory layout

Three front and two rear cold shoes offer several positions for compatible shoe-mounted gear. The separate 1/4-20 and 3/8-16 threaded points add flexibility for accessories that use those connections.

For a practical layout, decide where a microphone, light, or monitor belongs and check whether their placement leaves room for controls, cables, and hands.

Balance the grip against the full rig

At 124 g, the handle adds relatively little weight by itself.

The 10 kg maximum weight recommendation is a limit to consider for the complete arrangement, especially as accessories add up; it should not be treated as a promise about comfort or performance under every setup.

The silicone surfaces and low-angle grip design make the handle a sensible choice for handheld positioning, while its added height may be less convenient for compact storage.

Alternatives to SmallRig Top Handle

No alternative model is recommended here. Compare the cage interface, grip style, and accessory mounts that matter to your setup before choosing another handle.

Is SmallRig Top Handle Worth It?

The SmallRig Top Handle 3765 is worth considering when your cage has compatible ARRI-style locating holes and you want one lightweight part to provide both a low-angle grip and multiple accessory mounts.

Its five cold shoes, threaded attachment points, and silicone contact surfaces make it adaptable for a configured camera rig.

Check the cage interface and planned accessory layout before buying, and account for the full setup against the 10 kg maximum weight recommendation.

If those needs align with the design, this handle is a practical addition; if you need a low-profile rig or a different mounting interface, choose a handle that matches those constraints.

Your review at a glance

SmallRig Top Handle 3765
4.8/5

2,000+ ratings

Read Amazon Reviews

SmallRig Top Handle 3765

A lightweight top handle for camera cage users who want a comfortable low-angle grip and several mounting points for on-camera accessories.

  • Designed for camera cages with ARRI-style locating holes; the handle attaches using a locking screw tightened with an Allen wrench.
  • Hollowed-out construction keeps the handle’s stated weight to 124 g.
  • Made mostly from aluminum alloy and fitted with anti-slip, anti-freeze silicone.
  • Three cold shoe mounts are positioned at the front, with two more at the rear.

Written by

holymountainaustin.com Editorial Team

Editorial team

Independent editorial coverage of live music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Top Handle 3765

SmallRig Top Handle 3765

A lightweight top handle for camera cage users who want a comfortable low-angle grip and several mounting points for on-camera accessories.

  • Designed for camera cages with ARRI-style locating holes; the handle attaches using a locking screw tightened with an Allen wrench.
  • Hollowed-out construction keeps the handle’s stated weight to 124 g.
Check Video Reviews on Amazon