Product Reviews

SmallRig Cold Shoe Mount 2060 Review: A Simple Way to Add Accessories

A practical two-pack for camera builders who need to attach a microphone, flash, or LED to a compatible cage, handle, or plate.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review is for camera users who need a straightforward way to add a shoe-mounted accessory to a cage, handle, or plate.

This two-piece aluminum set includes mounting screws and tools for building a compact rig.

SmallRig 2060 Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera builders who need to attach a microphone, flash, or LED to a compatible cage, handle, or plate.

  • Two aluminum-alloy cold shoe mounts, each measuring 25 by 25 mm.
  • Each mount has a 1/4-inch-20 threaded hole for attachment to a compatible cage, plate, handle, or other accessory.
  • The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • The mount is intended for attaching a microphone, flash, or LED to compatible camera rig accessories.

Pros

  • Two mounts in one set provide a spare or allow two mounting points.
  • Includes both 1/4-inch-20 and M2.5 screws for supported mounting arrangements.

Consider before buying

  • It provides a fixed mounting position, so it will not angle an accessory for a different viewing or lighting direction.
  • The maker excludes DJI and ZHIYUN gimbals, limiting its fit for those systems.
Read the full review summary

The 2060 is a small, fixed cold shoe mount intended to give compatible camera accessories a place to attach a microphone, flash, or LED.

Its 25 mm square footprint and included 1/4-inch-20 screw make it suited to setups with a matching threaded hole, while two M2.5 screws provide another fastening option where appropriate.

This is a practical choice for people assembling or adjusting a camera cage rig who value a basic mounting point and a spare.

The set is less suitable when the accessory needs angle adjustment or when the mount will be fitted to a DJI or ZHIYUN gimbal; those uses are specifically excluded.

The buying factors

SmallRig 2060 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

7/10

Mounting flexibility

The 1/4-inch-20 connection and included M2.5 screws offer useful mounting options for compatible accessories.

8/10

Accessory compatibility

It is designed to support common shoe-mounted items such as microphones, flashes, and LED lights.

8/10

Rig integration

The compact square mount is intended for cages, handles, plates, and similar camera accessories.

7/10

Installation guidance

Surface arrows indicate mounting direction, and the package includes a hex spanner for fastening.

8/10

Pack value

Two mounts are supplied, which can support separate rig positions or leave a spare available.

4/10

Position adjustment

The described design provides a fixed shoe mount rather than an adjustable positioning joint.

Key Features and Specifications of SmallRig 2060 Mount

  • Two aluminum-alloy cold shoe mounts, each measuring 25 by 25 mm.
  • Each mount has a 1/4-inch-20 threaded hole for attachment to a compatible cage, plate, handle, or other accessory.
  • The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • The mount is intended for attaching a microphone, flash, or LED to compatible camera rig accessories.
  • Two surface arrows indicate the mounting direction.
  • Bending bevels at one end are designed to help prevent accidental removal of a shoe-mounted accessory.
  • The product is not suitable for DJI or ZHIYUN gimbals.

Pros and Cons of SmallRig 2060 Mount

Pros

  • Two mounts in one set provide a spare or allow two mounting points.
  • Includes both 1/4-inch-20 and M2.5 screws for supported mounting arrangements.
  • Compact 25 mm square footprint suits small camera rig configurations.
  • Direction arrows and included spanners make setup more straightforward.

Consider before buying

  • It provides a fixed mounting position, so it will not angle an accessory for a different viewing or lighting direction.
  • The maker excludes DJI and ZHIYUN gimbals, limiting its fit for those systems.
  • For a cage, the correct fastening method depends on its design; most cages use the included 1/4-inch-20 screw, while the SmallRig Full Cage 1661 is called out as an exception.

Who Should Buy SmallRig 2060 Mount?

Good fit

Consider the SmallRig Cold Shoe Mount 2060 if your cage, handle, or plate has a compatible 1/4-inch-20 or M2.5 threaded mounting point and you want a simple place for a microphone, flash, or LED.

The supplied screws and spanners make it a useful small addition to a rig-building kit.

The two-piece pack also makes sense if you expect to configure more than one camera accessory or want a second mount on hand.

Before choosing it, check the threading and available space on the specific cage or plate, and confirm that your intended setup is not a DJI or ZHIYUN gimbal.

Who should skip it

Skip this mount if your accessory needs a tilt or swivel adjustment at the attachment point; the described design is a fixed shoe mount.

Also look elsewhere if you intend to use it on a DJI or ZHIYUN gimbal.

How the SmallRig 2060 Mount Fits a Camera Rig

A compact mounting point

At 25 mm square, the mount is meant to add a small shoe interface to a compatible rig component.

That can help keep a microphone, flash, or LED attached to a cage, handle, or plate without requiring a larger mounting assembly.

Choose the fastening method carefully

The package has 1/4-inch-20 and M2.5 screws, but the suitable fastener depends on the accessory's threaded holes.

For most cages, the guidance is to use the 1/4-inch-20 screw; the SmallRig Full Cage 1661 is an exception where the M2.5 threading is needed. Check the fit and fastening point on your own rig before installation.

Fixed placement favors simple builds

This mount is designed to provide a shoe rather than reposition an attached device.

That favors a clean, fixed location for a small accessory, while setups that require changing a light or monitor angle will need a mount designed to adjust positioning.

The bevels and arrows support setup

Surface arrows show the mounting direction, and bevels at one end are intended to help keep a shoe-mounted accessory from sliding off accidentally.

These details can make orientation and attachment easier to manage, though buyers should still ensure the accessory is properly seated for their rig.

Alternatives to SmallRig 2060 Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 for a simple fixed shoe and a two-mount pack. Consider the 1135 when repositioning a compatible accessory is more important than keeping the mount fixed, while respecting its stated weight guidance.

  • The 1135 uses a double ball head that rotates through 180 degrees and locks with a side wingnut; it has a cold shoe and 1/4-inch screw on both ends.
  • It is not recommended for a monitor or LED light over 1 kg.
  • The SmallRig 2060 is a fixed cold shoe mount for adding an accessory to a compatible camera rig component.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Mount 3577

The 2060 is the better fit when you want a direct fixed mount and two pieces in the package.

The 3577 suits buyers who need tilt adjustment and a lightweight mount, provided their device stays within its 250 g limit.

  • The 3577 is a lightweight mini ball-head mount that tilts up to 138 degrees.
  • It weighs 20 g, supports devices up to 250 g, and attaches to a camera or cage through a cold shoe base.
  • The 2060 provides a fixed shoe mount with a 25 mm square footprint and includes multiple screws for compatible rig attachment.

Is SmallRig 2060 Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a compact, fixed shoe attachment on a compatible cage, handle, or plate.

Its two-mount pack, included fasteners, and small footprint make it a useful rig accessory for microphones, flashes, or LEDs.

Check thread compatibility and mounting space before buying, and choose a different design if you need angle adjustment or use a DJI or ZHIYUN gimbal.

For a straightforward mounting point on a supported camera rig, the 2060 offers a practical, simple solution.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera builders who need to attach a microphone, flash, or LED to a compatible cage, handle, or plate.

  • Two aluminum-alloy cold shoe mounts, each measuring 25 by 25 mm.
  • Each mount has a 1/4-inch-20 threaded hole for attachment to a compatible cage, plate, handle, or other accessory.
  • The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
  • The mount is intended for attaching a microphone, flash, or LED to compatible camera rig accessories.

Written by

holymountainaustin.com Editorial Team

Editorial team

Independent editorial coverage of live music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical two-pack for camera builders who need to attach a microphone, flash, or LED to a compatible cage, handle, or plate.

  • Two aluminum-alloy cold shoe mounts, each measuring 25 by 25 mm.
  • Each mount has a 1/4-inch-20 threaded hole for attachment to a compatible cage, plate, handle, or other accessory.
Check Video Reviews on Amazon