Product Reviews

SmallRig 2905B Field Monitor Mount Holder Review

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact accessory for camera rigs that need a monitor positioned above a cage or handle.

Its cold shoe base, adjustable tilt and swivel, and anti-twist details make it a practical fit when you want flexible viewing angles without adding a longer arm.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle using a cold shoe.
  • Tilts through 180 degrees and swivels through 360 degrees.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins on top help secure compatible monitors, while a silicone pad helps prevent scratching and twisting.

Pros

  • Provides broad tilt and swivel adjustment in a compact holder.
  • Offers both cold shoe and 1/4-inch-20 mounting connections.

Consider before buying

  • Swivel tension requires the included Allen wrench rather than a hand-adjustable control.
  • The load limit changes with tilt angle, so heavier setups need careful positioning.
Read the full review summary

The SmallRig 2905B combines a cold shoe connection with 180-degree tilt and 360-degree swivel, so it can place a compatible 5- or 7-inch monitor close to the camera.

Tilt tension adjusts with a thumbscrew; swivel tension uses the included Allen wrench. Locating pins and a silicone pad are intended to help secure compatible monitors and protect their surfaces.

This mount suits compact camera builds where a direct, low-profile monitor position matters.

Its 1/4-inch-20 top screw can also support accessories such as a microphone or light, while the base includes a threaded hole for a magic arm or stabilizer.

Buyers should account for the stated load limits at different tilt angles and retighten the knurled screw with the Allen wrench for added security.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle flexibility

Offers 180-degree tilt and 360-degree swivel for adjusting the viewing position.

8/10

Mounting options

Combines a cold shoe base, a 1/4-inch-20 threaded hole underneath, and a 1/4-inch-20 top screw.

8/10

Monitor compatibility

Designed for 5- and 7-inch monitors, with locating pins and a silicone pad.

8/10

Tension adjustment

Tilt tension adjusts by hand with a thumbscrew; swivel tension takes the supplied Allen wrench.

7/10

Load guidance

Provides different maximum loads by tilt angle, so buyers can match setup weight to position.

9/10

Compactness

The holder weighs 76 grams and has a folded size of 78 by 67 by 42 millimeters.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle using a cold shoe.
  • Tilts through 180 degrees and swivels through 360 degrees.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins on top help secure compatible monitors, while a silicone pad helps prevent scratching and twisting.
  • Cold shoe adapter at the bottom; the base also has a 1/4-inch-20 threaded hole.
  • A 1/4-inch-20 top screw can mount a monitor, microphone, or light.
  • Load capacity varies by angle: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Provides broad tilt and swivel adjustment in a compact holder.
  • Offers both cold shoe and 1/4-inch-20 mounting connections.
  • Locating pins and a silicone pad address monitor movement and surface contact.
  • Tilt tension is easy to adjust by hand.
  • Low listed weight and compact folded dimensions suit small camera rigs.

Consider before buying

  • Swivel tension requires the included Allen wrench rather than a hand-adjustable control.
  • The load limit changes with tilt angle, so heavier setups need careful positioning.
  • The mount calls for tightening the 1/4-inch knurled screw with the Allen wrench for added security.

Who Should Buy SmallRig Monitor Mount?

Good fit

Choose the SmallRig 2905B if your rig has a compatible cold shoe and you want a monitor mounted close to the camera with substantial angle adjustment.

The thumb-adjustable tilt tension is useful when you regularly reposition the screen, while the full swivel range gives flexibility for changing its orientation.

It is also a reasonable option for a compact accessory setup: the top screw can hold a microphone or light, and the lower threaded hole provides another connection route.

Before settling on a configuration, check the attached device's weight against the limit for the angle you plan to use and confirm that the cold shoe or threaded mounting point fits your rig.

Who should skip it

Look elsewhere if you need a long reach between the camera and monitor; this holder is a compact mount rather than an extended articulating arm.

Consider another mounting approach if you need to change swivel tension frequently without a tool or if your device and chosen angle exceed the corresponding load limit.

How the SmallRig Monitor Mount Fits a Camera Rig

Angle control for on-camera viewing

The 180-degree tilt and 360-degree swivel give operators room to orient a monitor around the camera body.

Tilt tension is adjusted at the thumbscrew, which makes that part of setup accessible by hand; swivel tension has a separate adjustment that uses the included Allen wrench.

Mounting and anti-twist details

The bottom cold shoe adapter is suited to a camera cage or handle with a compatible shoe, while the lower 1/4-inch-20 threaded hole offers another way to attach the mount through a magic arm or stabilizer.

At the top, locating pins and a silicone pad are intended to improve contact with compatible monitors, and the 1/4-inch-20 screw can serve other small accessories as well.

Match the load to the tilt

The holder's allowable load depends on its angle: the listed maximum is under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees.

Since these limits differ, check the planned screen and accessory weight at the position you expect to use, and use the Allen wrench to retighten the knurled screw as directed.

A compact choice for direct mounting

At 76 grams, with a folded size of 78 by 67 by 42 millimeters, the holder adds little bulk to a small rig.

Its design favors placing a screen near the mounting point; buyers who need more distance or reach should look for an arm-based layout instead.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig 6313 Camera Monitor Mount

Consider the 6313 if portrait mounting and a retractable locating screw suit your setup. The 2905B is a strong fit when its 5- and 7-inch monitor design and angle-specific load guidance match your needs.

  • The 6313 also provides 180-degree tilt and 360-degree pan, with a retractable 1/4-inch-20 locating screw, locating pins, and a cold shoe base that locks in place.
  • It supports horizontal and vertical installation and lists a weight of 71.7 grams.
  • The 2905B supports 5- and 7-inch monitors, offers 180-degree tilt and 360-degree swivel, and uses a cold shoe base with a 1/4-inch-20 threaded hole underneath.

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Articulating Magic Arm

Choose the 5.5-inch arm if you need to move a monitor farther from its mounting point or want an articulating link between two 1/4-inch connections.

The 2905B better suits a direct cold shoe installation close to a cage or handle.

  • This 5.5-inch articulating arm has 1/4-inch screws at both ends, double 360-degree ball heads, and a stated best weight load of 1.5 kilograms.
  • The 2905B is a compact direct mount with a cold shoe base, 180-degree tilt, and 360-degree swivel.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact rig that needs a monitor placed close to a cage or handle with flexible angle adjustment.

Its cold shoe and 1/4-inch-20 connections, anti-twist details, and hand-adjustable tilt tension make it versatile for this role.

Buy it if your mounting point is compatible and your setup stays within the load limit for the selected angle.

The tool-adjusted swivel tension and angle-dependent limits are the main practical considerations; for longer reach, an articulating arm may be a better match.

Your review at a glance

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle using a cold shoe.
  • Tilts through 180 degrees and swivels through 360 degrees.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
  • Locating pins on top help secure compatible monitors, while a silicone pad helps prevent scratching and twisting.

Written by

holymountainaustin.com Editorial Team

Editorial team

Independent editorial coverage of live music.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount Holder

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle using a cold shoe.
  • Tilts through 180 degrees and swivels through 360 degrees.
Check Video Reviews on Amazon